Double Strand Gemstone Necklace with Teardrop Pendant Tutorial

Tiger Eye & Lava Beads Necklace Tutorial: How to Make a Multi-Strand Gemstone Necklace using a Clasp and Knot Covers. | DIY Handmade Beaded Gemstone Necklace with Teardrop Pendant, Beads and Thread.| How to make a Multi Strand Beaded Necklace Tutorial for Beginners.

Welcome to Bead Lot's DIY Jewelry Tutorial! Looking to add a touch of elegance and earthy charm to your jewelry collection? Dive into our latest tutorial on creating your very own Multi Strand Beaded Gemstone Necklace with Teardrop Pendant. In this step-by-step guide, we'll show you how to craft a stunning piece using 6mm Tiger Eye Beads, 6mm Lava Beads, 4mm Hematite Beads and Thread. Perfect for both beginners and seasoned jewelry makers alike.

Discover the joy of handmade beaded jewelry as we guide you through the process of creating a double-strand necklace design with a captivating teardrop pendant. From selecting the perfect beads to mastering essential techniques like stringing and finishing with clasps, you'll gain valuable skills that will elevate your future jewelry-making projects. Whether you're crafting for yourself or creating heartfelt gifts for loved ones, our DIY Jewelry Handmade Beaded Gemstone Necklace with Teardrop Pendant tutorial is sure to impress. Dive into the world of handmade jewellery today and let your creativity shine!

Video Tutorial Here: 👇

 You will need the following materials to make this Beaded Necklace design:

 Step-by-step Instructions on How to Make a Double Strand Gemstone Necklace:

 Step 1: Choose Your Beads:

Select an assortment of gemstone beads that coordinate harmoniously with your teardrop pendant. Consider the colors, shapes, and sizes that will complement the pendant and create visual interest in your necklace.

Step 2: Prepare Your Workspace:

Lay out your beads, pendant, wire or thread, crimp beads, jump rings, clasp, pliers, and scissors on your work surface. Use a bead mat or tray to keep your beads organized and prevent them from rolling away.

Step 3: Measure and Cut your Thread:

Determine the desired length of your necklace and add a few extra inches for attaching the clasp. Cut your thread to the appropriate length using scissors. This necklace will consist of two strands. The first thread should be 34 inches long to achieve a 14-inch strand when folded in half for stringing, with extra length required for finishing and tying the necklace. The second strand should measure 38 inches to accommodate the completed necklace's 15-inch length.

Step 4: Starting the Necklace:

Take the 34 Inch thread and fold it in half. Pull a Size 11/0 Seed Bead to the middle. Start forming a knot. Tie 2-3 knots. Take the two strands of thread and place a needle on both sides. (Repeat the same step for the 38" long thread.)

Step 5: Add a Knot Cover, Bead Cap & Jump Ring:

Pull a knot cover onto both threads to cover our seed bead and knots. Using a plier close the two sides of the knot cover together. Add an 18 Gauge jump ring to the knot cover. Using Plier close the jump ring shut. Pull a bead cap onto both threads. This is the starting point of the necklace.

Step 6: Start Stringing your Beads onto the first strand of the Necklace:

For this design there are 16pcs of 6mm Lava Rock beads, followed by 22pcs of 6mm Tiger Eye Beads and 23pcs of 4x2mm Hematite Spacer beads alternating each other. Add another 16pcs of Lava Beads to finish the 14" strand.

Step 7: Add a Bead Cap, Knot Cover & Jump Ring:

Add a bead cap followed by a knot cover and a size 11/0 seed bead. Take one needle and loop it through the seed bead once again. Take the two threads and start forming a knot. Tie 2-3 Knots. Take both needles and push it back through knot cover the bead cap and the next 5 beads. Close the knot cover together with a plier. Add a jump ring to the knot cover and close it shut with pliers. Cut any excess thread sticking out.

Step 8: Add Soldered Jump Rings:

Add two soldered jump rings to both ends of the necklace. Secure them with pliers and jump rings. This will be used to attach the strand of the necklace together. 

Step 9: Repeat the same steps for the 15" Strand of the Necklace:

Repeat the same steps until Step 6 for the 38" Inch strand of thread.

Step 10: Start Stringing your Beads for the second strand of the Necklace:

For this design there are 17pcs of 6mm Lava Rock beads, followed by 12pcs of 6mm Tiger Eye Beads and 13pcs of 4x2mm Hematite Spacer beads alternating each other. 

Step 11: Add your Tiger Eye Teardrop Gemstone Pendant:

Add a 24x14x8mm Teardrop Tiger Eye Semi Precious Stone Pendant as the center piece or focal point of this Necklace.

Step 12: Continue Stringing the Rest of the Beads:

Add 12pcs of 6mm Tiger Eye Beads and 13pcs of 4x2mm Hematite Spacer beads alternating each other. Followed by another 17pcs of 6mm Black Lava Rock Beads.

 Step 13: Add a Bead Cap, Knot Cover & Jump Ring to Finish the Necklace:

Add a bead cap followed by a knot cover and a size 11/0 seed bead. Take one needle and loop it through the seed bead once again. Take the two threads and start forming a knot. Tie 2-3 Knots. Take both needles and push it back through knot cover the bead cap and the next 5 beads. Close the knot cover together with a plier. Add a jump ring to the knot cover but do not close it shut yet. Cut any excess thread sticking out.

Step 14: Attach the second strand of the Necklace to the Soldered Ring:

Take the end of the necklace with the open jump ring and attach it to the the soldered jump ring (on the other strand of the necklace.) Using your plier close the jump ring shut once its attached to the soldered jump ring. Repeat the same step for the other side.

 Step 15: Add a Chain Extender to your Necklace:

Add a silver chain extender to your necklace using pliers. Add a tiger eye beads with a ball head pin for extra design. Use your plier to attach the jump ring onto the soldered Ring. 

Step 16: Add a Lobster Clasp:

To finish your necklace add a lobster clasp onto the soldered ring on the other side using a jump ring and pliers.

Step 17: Finishing Touches:

Inspect your necklace for any loose beads or uneven sections, and make any necessary adjustments. Your handmade beaded gemstone necklace is now ready to be worn or gifted with pride!

Congratulations on creating your very own handmade beaded gemstone necklace with a captivating teardrop pendant! We hope this tutorial has inspired you to explore the world of jewelry making further and unleash your creativity. Whether you're crafting for yourself or sharing your creations with others, remember that the joy of handmade jewelry lies in the love and attention to detail that goes into each piece. Happy DIY Jewelry Making & Crafting!

 

 


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.